Product
• Kayfix DWR is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
• For bonding Plywood/MDF/Particle board etc with each other and bonding with Laminate/Veneer etc.
• For Edge Bonding, Finger joining and wooden flooring where water seepage is not present
• The surface to be bonded should be properly leveled, free from oil/grease/dust and excess moisture. For best results roughen the surfaces to be bonded
• Apply even coat of adhesive on both the surfaces. Adhesive should be applied first on the non-porous surface and then on the porous surface with the help of spreader, roller or brush
• The entire process of application & pressing should be complete within 12 minute.
• Both surfaces are now brought together with proper alignment and pressed firmly to ensure uniform contact & even spreading of adhesive.
• Bonded area should be kept under pressure with the help of tapes, nails, clamps or support.
• Any excess adhesive should be wiped out with a wet cloth immediately.
• Pressure can be removed after 8 hours and put to use. Complete curing is achieved in 24 hours
• Suitable for Vertical/Horizontal applications.
• Excellent spreadability for better coverage.
• Non Hazardous / non inflammable and free from harmful solvents.
• Economical in long run.
• Special preservative used to protect adhesive from any bacterial growth during storage.